Advice on installation and maintenance

FLOORING

Composite marble flooring should be laid using fast setting and hydrating elastic/deformable adhesives (such as ELASTORAPID MAPEI).
Flooring should be laid using a double spreading technique.
Minimum recommended joint width is  3 mm for flooring up to 60x60 cm in size and 5 mm for flooring with sizes larger than 60x60 cm.
To facilitate drying and prevent moisture from ponding we recommend sealing the joints in the flooring at least 3-4 days after laying the flooring, using specific products for elastic joints.
In any case it is good practice to carefully follow the instructions given by the manufacturers of the various products used.